£234.00 / €278.46

High performance pump station from Barberi Italy. Featuring easy fix bracket, 0.038 W/mK insulated case & Grundfos Solar 15/65 - 130 pump.
Also available for this pump group are insulated controller plates allowing you to easily intergrate Steca and Resol controllers in to the belly of the pump station.
Key Features:
-Connections 22mm compression (available adaptors to DN16 or Cobra SUN DN16)
-Complete brass assembly with copper extension.
-Insulated body which is molded to fit the parts, for a high level of insulation 0.038 W/mK
-No hydraulic connections directly over the pump,
-Latest Grundfos eco pump
-All major hydraulic system parts
-Possibility to integrate the controller, using controller plug ins (See Below)
-Non return valves in both flow and return lines to stop heat loss over night
-Integrate air removal
Specification:
-Dimensions 300mm x 460mm x 168mm
-Max intermittent temperature 140'C
-Maximum Pressure 10 bar
Hydraulic Unit:
-Brass CW617N
-Seals Viton / Klinger
Pump:-Grundfos Solar 15-65 130
Molded Insulating Box: EPP
General:
-Flow Meter 3 - 15 l/m
-Manual Air Stop / Removal
-Isolation Valves in Flow & Return lines
-Non return valves in both flow & return
-Expansion Vessel connection ¾"M Flatface
-6 Bar solar rate pressure relief valve
-Pressure gauge

find out more

Price Inclusive of Delivery**
Recommended Cylinder / Consumption approx 200Ltrs
The Kit consists:
All collectors are approved to EN12975 & Solar KeyMark
1 × Kloben Sky Professional CPC 16 Tube collector, featuring 1500 x Ø58mm vacuum tubes
2 x Tile fixing sets
1 × Barberi Twin Line Pump Station, containing: Grundfos Solar 15-65 pump, Flow setter 3 to 15 Ltr/M, Filling & Flushing Connection, Isolation valves on flow and return, Non return valves on Flow and Return, Safety pressure valve (6 bar), Pressure gauge, Manual Air Stop, Thermometers on Flow and Return Line, Wall fixings, Expansion Vessel Connection & Molded Insulated body. 22mm Compression Connections
1 × TR0301sc Steca Controller, Features: 3 Inputs & 1 Output. Pump speed control output, Animated display with pictograms, very user friendly. complete with 2 x Silicone PT1000
1 × PT1000 2 mtr sensor
1 × 18 Ltr High Pressure / Temperature Expansion Vessel 130'C
1 × Expansion Vessel Mounting Kit (with flexible mounting hose)
2 × 10 Ltr Premix Anti freeze / Heat Transfer Fluid
1 × SDC96 Solar Discharge Vessel
1 × Sensor Connection Box for Lightening Protection
1 × Tube Heat Conductive Paste
1 × High Temperature System Drain Valve
1 × Drain Valve Adaptor
1 × Inclusive Delivery
1 × Inclusive Delivery Insurance

find out more

£9.13 / €10.86

Insulated plug-in adaptor for integrating Steca TR0301 / TR0301sc into Barberi Twin Line Pump Station
find out more

Kloben Sky Pro 12
Professional Version CPC Collector
12 tube solar waterheating collector LOW PROFILE
Featuring:
-Contoured Aluminium Manifold
-1500mm x Ø58mm Double walled vacuum tubes
-Special selective coated tubes for higher heat Collection and reduced loss.
-U Tube Configuration, Can be installed vertically or Flat
-Light weight aluminium frame - Pre assembled
-Approved to EN12975
-Approved Solar Keymark
-Dimensions 1342mm x 1626mm (Tall) x 116mm
-Dry weight 41Kg
-Zero Loss 71,90%
-Thermal loss coefficient a1= 1,063 W/m²K
-Thermal loss coefficient a2= 0,005 W/m²K²
-Aerodynamic design, to minimise wind vibration.
-Integrated rear rails top and bottom for easy installation
-Specail clip in tube supports with quicktube removal
-Heat transfer fins inside tubes for high performance
-Attractive styling

find out more

£13.30 / €15.83

High Tensile Protection Tape
Used to cover and protect external insulation from UV, bird and rodent attack.

Width 40mm
Length 66Mtrs
Polypropylene with natural rubber adhesive
Black with a Tensile Strength 300N/cm


find out more

£223.20 / €265.61

SunnPro-Dual-15
Twin DN16 flexible stainless steel pipe
--15Mtr length
--19mm wall high temperature insulation
--Insulation intermittent to +175'C Tested to DIN4102-B2
Thermal conductivity value 0.040 W/mK at 40'C

--DN16 high quality AISI 316L (DIN 17441) - ID 16.3mm +- 0.3mm / OD 21.4mm +- 0.3mm
--External PVC coating with high tensile strength tape for bird attack.
--Intergrated buckle fixing straps, with eyelets (180mm) for screw fixing (screws not included)
--Intergrated sensor extension wire

find out more